Why Can't I See Any Data After Connecting an Integration?
Learn what to check when an integration has been connected successfully but no data is appearing in BCB.
Before You Begin
- Data displayed in BCB is sourced from your connected systems.
- It may take some time for data to become available after connecting an integration.
- The amount of data available depends on the information stored in the connected system.
Things to Check
Check 1. Confirm the Integration is Connected
Navigate to Setup → Integration Centre and confirm the integration shows as connected.
Check 2. Confirm You Connected the Correct Organisation
Verify that the correct accounting or operational organisation was selected during the connection process.
Check 3. Check That Data Exists in the Source System
BCB can only display data that exists in the connected platform.
For example:
- Contacts must exist in the source system before they can appear in BCB.
- Transactions must exist in the source system before they can appear in BCB.
- Categories and accounts must exist in the source system before they can be imported into BCB.
Check 4. Run an Initial Sync
After connecting an integration for the first time, you will need to perform a sync before data can be imported into BCB.
Navigate to Setup → Integration Centre, locate your integration and select Sync.
The sync process imports information from your connected system into BCB.
Check 5. Allow Time for Data to Become Available
Recently connected integrations may require time before imported data becomes available within BCB
Still Can't See Any Data?
If your integration shows as connected but data is still not appearing, contact BCB Support for assistance.
When contacting Support, include:
- The integration you connected
- The organisation connected
- The type of data you are expecting to see
- Screenshots where possible
Important Information
- After connecting an integration for the first time, an initial sync is required before data can be displayed in BCB.
- A successful connection does not guarantee data will appear immediately.
- BCB only displays information available from the connected source system.
- If the incorrect organisation was connected, organisation data may need to be deleted before connecting a different organisation.